Reference: N11900600653
Brand: Lalizas
Reference: N13000719550
Brand: Monteisola Corde
Reference: N10203012861
Brand: Osculati
Reference: VTMACS7000
Brand: Vitrifrigo
Reference: N30610500670N
Brand: Osculati
Reference: N10502903526
Brand: Can-Sb Marine
Payments
Victron Energy
Ultimatron France
Lowrance
High quality enamel with excellent resistance to 'industrial and marine atmosphere, aging and ultraviolet rays. Non-yellowing, excellent chemical and mechanical resistance and gloss retention.
MORE INFORMATION
GEL GLOSS PRO ENAMEL
Gel Gloss Pro is a two-component polyurethane finish. A high quality enamel with excellent resistance to marine and industrial environment, to ageing and to ultraviolet rays. Does not yellow, is very flexible and retains its gloss. Excellent levelling gives improved aesthetic appearance to topsides, decks, superstructures etc. Gel Gloss Pro can be applied directly to gel coats or to epoxy or polyurethane primers (Epoply,Polygoal). A wide range of colours, which can be blended, is available. Not suitable for continuous water immersion.
Excellent expansion giving an improved aesthetic appearance to topsides, decks, superstructures with specular and shiny surfaces.
Direct application on gel coats or epoxy or polyurethane Plastolite Pro (our code COL222, COL2222), Polyrex Pro (our code COL208, COL209).
A wide range of colours, which can be blended, is available. Not suitable for continuous water immersion.
Application of 2 coats (3 for more coverage) is recommended.
Theoretical yield of 13.5 sqm/lt.
Specific gravity 1.29.
Minimum recoating time 7 hours at 20 ° C.
Recommended thinner 6700, our code COL255, for spray application; for application by roller or brush thinner 5780 is recommended, our code COL252.
Not suitable for continuous immersion.
Unit size 0.75 lt.
TECHNICAL DATA
Specific weight: 1.29 ± 0.02 Kg / L
Solids by volume: 54%
Colour: refer to colour chart
Unit size: 0,75 L / 2,50 L
APPLICATION: Apply with: brush - roller - conventional - airless spray
Drying time at 20°C: 7 hours
Pot life (20 ° C): 3-4 hours
Mixing ratio by volume: 3: 1 ratio by weight: 80: 20
Thinner: 6700 (Spray - Airless) or 6780 (roller - brush)
Thickness dry film per coat: 35-40 μ
Theoretical coverage per coat: from 15.4 to 13.5 m2/L
Recoating time at 20 ° C: min 3-4 hours max 48 hours
Number of coats: 2 (3 for more coverage )
- GREAT EXPANSION SPRAY AND BRUSH
- EXCELLENT MECHANICAL AND CHEMICAL RESISTANCE
- MAINTAINS GLOSS
- GOOD COVER
- CAN BE MIXED WITH OTHER COLOURS
- NON-SLIP FINISH WITH ADDITIVE
Unit size 0,75Lt.
Colour: 0,75Lt.
Colour: Sand Beige 411.
Specific References
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: YM473COL501
Brand: Veneziani
Reference: YM473COL509
Brand: Veneziani
Reference: YM473COL523
Brand: Veneziani
Reference: 473COL307
Brand: Veneziani
Reference: YM473COL500
Brand: Veneziani
Reference: 473COL301
Brand: Veneziani
Reference: YM473COL505
Brand: Veneziani
Reference: 473COL170
Brand: Veneziani
Reference: YM473COL530
Brand: Veneziani
Reference: 473COL302
Brand: Veneziani
Reference: 473COL1194
Brand: Veneziani
Reference: 473COL150
Brand: Veneziani
Reference: YM473COL522
Brand: Veneziani
Reference: 473COL156
Brand: Veneziani
Reference: 473COL160
Brand: Veneziani
Reference: 473COL1192
Brand: Veneziani
High quality enamel with excellent resistance to 'industrial and marine atmosphere, aging and ultraviolet rays. Non-yellowing, excellent chemical and mechanical resistance and gloss retention.
check_circle
check_circle
